The Best Pool Hoses of 2022

• Best for Overall: Zodiac Pool Systems R0527800
• Best for Performance: Intex 1.5" Diameter Accessory Pool Pump
• Best for Budget: Poolmaster 33430 Heavy Duty In-Ground
• Best for Durability: U.S. Pool Supply 1-1/2" x 30 Foot
• Best for Design: Blue Devil 25-Foot Backwash Hose

As usual, any product for general pool cleaning also contains many different parameters that need to be considered. However, reality proves that some factors have a greater impact than others, creating a difference between products. To easily get the most suitable selection of pool hoses, you can't skip the below section of the article because I have compiled the information and special parameters that you need to pay special attention to when choosing to buy this type of device.

Length

We all agree that when it comes to wires, pipes, or all the tools that carry out the transmission task, length is one factor that comes up the most when we conduct an analysis. And, of course, pool hoses are no exception.

A longer product will also be bulkier, take up more space, and be much more expensive than a shorter product. While shorter tubes are neater and cheaper, they do not fully serve the needs of large pools. So don't let any factors except the suitability for the pool or suit your own needs if you don't want to face unnecessary trouble.

Often the length of the pool hoses determines how far the part can go. For example, a pipe that goes one-third of its size will be shorter than a pipe that has traveled two-thirds of its length. So in case you want to take the line to the full size of the tank, the long pipes will be a reasonable choice.

For small pools, the hose only needs to be about 15 to 20 feet long to be suitable for you to conduct water without worrying about shortages when operating. Whereas with an average pool, you will need pool hoses that are 30 to 35 feet in length to use. And finally, the largest pools will need 40 feet or more hoses for steady discharge.

Flux

Flux tells us the capacity of pool hoses to pass water over a certain period. Usually, based on the diameter of the pipe, we can make relatively accurate judgments about the throughput that the manufacturer allows the tube to possess. Of course, just like the length, the diameter, or you can understand that the larger the width of the tube, the more cumbersome and expensive it is. So the wisest choice is never products that are too large in diameter if you don't need them.

On the market today, most basic pool hoses like the Haviland NA101 have a width of about 1.4 to 2 inches. This diameter ensures the pipe can discharge water from a small to a medium-sized tank. Of course, the larger the diameter, the more water will flow out, and with large pools, the faster the water will flow, saving you time and effort. However, I need to emphasize that this benefit is only evident in large or super large pools.

Flexibility

No matter how much you try to preserve it, it is inevitable that the water pipe must contact the ground or change its shape when operating. And to minimize unnecessary incidents that lead to damage, choosing flexible pool hoses is a good idea for us to consider.

First, you need to choose pipes that can bend outside easily while keeping the internal structure stable. And pay attention to whether the product stops the flow every time the tube is folded. The best choice is the non-folding hose models. Although a bit hard to find on the market these days, these pool hoses are always the right choice in any situation.

Reliability

It is not difficult to understand when we all want to own a durable product to ensure safety when using and ensure cost problems when not having to replace it too many times. And pool hoses are no exception. With this line of wastewater discharge pipes, you need to pay attention to two decisive issues for durability: toughness and component materials.

In terms of toughness, I have analyzed above. Generally, products with good flexibility, such as U.S. Pool Supply 1-1/2" x 36 Foot will resist all kinds of forces when there is deformation, thereby ensuring the product always works stably. At the same time, the constituent material provided for the tube is more resistant to elements that are harder to see with the naked eye, specifically the radiation and chemicals in the water.

High-quality EVA or synthetic resins often offer protection against dangerous types of radiation such as UVA or UVB. Thereby significantly increasing the pipe's durability even if you leave the device outdoors for weeks at a time. Meanwhile, the inner lining from high-quality materials will help limit the situation of calcium deposits or other chemical residues sticking to and causing corrosion.

Compatibility With Other Devices

We all agree that pool hoses are not the only tool to clean the pool. But instead, we will need dozens of devices from as large as a pool vacuum cleaner to as small as jammers and traps. Therefore, pool hoses must also have a design suitable for other types of equipment that users need to connect. One can choose from various converters, but this method is never a good one because of its high instability and can lead to unfortunate accidents.

Mobility

You are wrong if you think pipes are neat and can be easily stored anywhere because pool hoses and other types of plastic pipes are very difficult to move even with the cooperation of many people if the size and length of the product are too large. And as a matter of course, an object that is difficult to move will also be difficult for us to find a suitable place to store it. Bulky devices unnecessarily take up a lot of space, so never choose a tube model that lacks mobility unless you need to use it.

In addition to storing and moving out, hygiene is also an issue where mobility has a great influence. Not only because pool hoses are a sanitary device, but we can neglect to clean up plaque and bacteria that accumulate inside and outside of this type of pipe. And if the tube is too difficult to move, cleaning will certainly become a much more complicated problem.

Expense

Not every product with a high price is always of good quality. Thanks to the development, materials, and manufacturing methods have also been improved to reduce costs right from the manufacturing stage. Therefore, it is no longer strange for a cheap product to have outstanding quality, such as the typical Intex 29083E.

How often should pool hoses be replaced?

After a long time of operation, pool hoses will also gradually degrade, and we must replace the old product with a new one if we do not want to leak. Usually, after a year, you need to buy new pool hoses, but this number is only an average estimate in the condition you use and properly maintain. Without proper care, the time the tube can be used will be greatly reduced.

Where do you put the weights on a pool hose?

The depth of the pool is a determining factor in where you put the ballast pool hoses. The deeper the pool, the heavier the weight will be, resulting in a deeper sink. So in the case of collections 4' or less, use a hose weighing 4 to 12 from the cleaning agent. For pools 4-7' deep, use 2 weights, one 4" to 12" from the cleaner and the other 6' from the cleaner.

So above, I have introduced to you the ways so that we can choose which are the best pool hose that best suit your needs as well as introduce some products that you may like. Hopefully, the knowledge contained in today's article will help you make the best choice.